Viewsonic PJD6240 Bedienungsanleitung PDF herunterladen (Seite 24)

ViewSonic 17 PJD6220/PJD6230/PJD6240

Lamp Counter

Display the lamp’s elapsed operating time (in hours).

Lamp Counter Reset

Reset the lamp counter to 0 hours.

Power Saving

If no operation is performed for a specific period of time, the power to the projector is

automatically turned off.

Auto Source

Automatically scan the input source.

ECO Mode

Use this function to dim the projector lamp light output which will lower power

consumption and increase lamp life.

High Altitude

Turning on High Altitude mode operates the fans at full speed continuously to allow for

proper high altitude cooling of the projector.

Filter Mode

When an optional air filter is attached, be sure to turn on the “Filter Mode”; otherwise,

the machine can overheat and shutdown automatically.

OSD Timeout

Duration OSD menu stays active (at idle state by second).

Option (Computer / Video Mode)

Blank Screen

Blank the screen temporarily, and select the screen color when this function is active.

Start-up Screen

Select start-up screen when the projector is powered on or when no signal is input.

"User" is the screen that you captured.

Screen Capture

Capture the current projection screen as a start-up screen.

Password

Set or change the password. When the password function is added, image projection

requires an entry of the preset password at power-on.

DCR (Dynamic Contrast Ratio)

Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable

DCR will resume to normal contrast performance. DCR will impact lamp life and

system noise performance.

Closed Caption (Video and S-Video sources only)

Enable or Disable closed captions by selecting CC1 (closed caption 1, the most

common channel), CC2 or OFF.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 53 54

Keine Kommentare

Viewsonic PJD6240 Bedienungsanleitung Seite 24